Handler

1000 High Speed Grinder

The 1000 H/S Grinder develops 1/4 HP at speed up to 18,000 rpm. Based on a old reliable design, the 1000 is an affordable alternative to a larger H/S Grinder
The 1000 is shipped complete with a steel chuck (which accepts 3/32" burs and mandrel), a lighted hood with base and a 3" suction outlet to connect to your suction unit.

Two toggle switches activate the light and motor separately. A hand wheel is mounted on the left shaft of the Grinder to allow the technician to slow the rpm of the unit when burs, mandrels and mounted points are changed on the manual chuck. Shipped complete and ready for use.

2000 High Speed Grinder

The 2000 H/S Grinder is the same as the 1000, but contains the addition of a variable speed foot control and flexible shaft with a manual Jacobs style handpiece. The flexible shaft may be connected directly onto the motor shaft with the supplied adapter.
The manual handpiece will accommodate burs, mandrels and mounted points with a shank diameter up to 1/4". Accessories are tightened into the handpiece via a Jacobs type key. The unit is shipped completer with accessories.

2001 High Speed Grinder

The 2001 is identical to the 2000, except a Doriot handpiece is supplied instead of the manual Jacobs type handpiece. 3/32"burs, mandrels and mounted points are interchanged on the Doriot handpiece via a twist of the handpiece's body.
The unit is shipped complete with accessories.

16C Accela/Rotor

The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment and No. 26A Red Wing Lathe. The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards. The high speed spindle incorporates an activating handle which opens and closes the 3/32” [0.2cm] collets for ease of changing burs and mandrels while the motor is running. Specify high or low base when ordering 16C.

Shipping Wgt.: 50 lbs [22.7 Kg]
Unit Dimensions: 19” wide x 9” high x 11” deep [48.2cm x 22.9cm x 30cm]
MFC: Handler

16D Accela/ Rotor Attachment

The 16D Accela/Rotor attachment turns your Red Wing Lathe into a High Speed alloy grinder. It attaches to the right side of your Red Wing lathe and provides 12,000 and 24,000 rpm speeds for proper metal finishing. Shipped complete with all necessary guards, instructions, light, and high speed spindle.

Shipping Wgt.: 11 lbs [5.0 Kg]
Unit Dimensions: 14” wide x 12” deep x 17” high [36cm x 31cm x 43cm]
MFC: Handler