Dental Service Parts

Parts Warehouse

Holders, Arms & Trays

Standard Syringe Hanger

• Fits 1/2" diameter hanger bars
• Aluminum back with choice of grey or black plastic front
• Holds Syringe, SE, or Universal HVE

Standard Handpiece Hangers

• Fits 1/2" diameter hanger bars
• Aluminum back with choice of grey or black plastic front
• Normally closed
• With or without lockout toggle

Standard HVE Hanger

• Holds standard HVE by base
• Fits 1/2" diameter hanger bars
• Available in grey or black

Aseptic HVE Hanger

• Smooth, seamless aseptic design
• Exclusive non-yellowing material
• Easy to wipe down
• Fits 1/2" Diameter hanger bars

Aseptic HP Hanger

• Smooth, seamless aseptic design
• Exclusive non-yellowing material
• Easy to wipe down
• Fits 1/2" Diameter hanger bars

Piezo Scaler Aseptic Hanger

• Special milled seat holds Piezo Scaler
• Smooth, seamless aseptic design
• Exclusive non-yellowing material
• Easy to wipe down
• Fits 1/2" Diameter hanger bars

Aseptic Syringe Hanger

• Smooth, seamless aseptic design
• Exclusive non-yellowing material
• Easy to wipe down
• Fits 1/2" Diameter hanger bars

Seamless Handpiece Hanger

• Fits 1/2" diameter hanger bars
• Grey smooth molded one-piece design
• No lockout
• Normally closed

Seamless Syringe Hanger

• Fits 1/2" diameter hanger bars
• Grey smooth molded one-piece design

Economy Syringe Hanger

• Mounting bracket included
• Use for syringes or handpieces

Economy HVE Hanger

• Mounting bracket included
• Use for holding HVE by the base

Auto Hanger Moldings

Syringe Hanger Moldings

HVE Hanger Moldings

SE To HP Hanger Adaptor

• Slips over your old SE base to allow use in an auto hanger

Cavitron Adaptor Sleeve

• Use to hold Cavitron in H.P. or Syringe holder
• Slides up over Cavitron handle and secures in place
• Locks in place with set screw

Flat Mount Hanger Adaptor

• Connects Hangers to a Flat Plate
• Use on 1/8" or Thinner Material
• Grey Plastic
• Fits Most Standard Hangers

Standard Accessory Air Signal Hanger

• Provides air signal when accessory is out of hanger
• Available in grey or black
• Use for all non-handpiece applications
• Normally open valve

Aseptic Accessory Air Signal Hanger

• Provides air signal when accessory is out of hanger
• Normally open valve
• Use for all non-handpiece applications
• Easy to wipe down

Low Voltage Signal Vacuum Hanger

• With lockout, normally closed
• Activates electrical accessories when out of hanger
• Grey non-marring plastic front

Aseptic Low Voltage Signal Hanger

• Without lockout, normally open or closed
• Activates electrical accessories

Low Voltage Signal Hanger

• Activates electrical accessories
• No lockout
• Normally open or closed

Low Voltage Signal Hanger

• Activates electrical accessories
• Includes lockout
• Normally open or closed

Low Voltage Hanger Switch

• Installs into most auto hangers
• N/O or N/C
• 6" leads

Hanger Valves

Arm Mount Pivoting Holder

• Bar accepts up to 4 hangers of choice (not included)
• Rotates 360°
• Pivots for optimum instrument access
• Tough Powder coated finish

Side Mount Swing Holder Bar

• Bar accepts up to 3 hangers of choice (not included)
• Rotates 180°
• Pivots for optimum instrument access
• Tough Powder coated finish

Holder Bar Mounting Brackets

• Use to mount wrap around hanger bars
• Choice of standard, or 1/2" hole for valve mounting

Wrap Around Holder Bars

• Use with brackets C-2510 or C-2512
• Create custom installations
• Durable Powder coated finish

Aseptic Hanger Bars

• Smooth, easy to wipe down
• Accepts barrier protection
• 360° rotation, full fore/aft pivot
• Choice of cavities hold Syr, SE, HVE by tip or HVEs by base
• Holds many combinations of instrumentation
• Use with folding and telescopic arms that accept a 1/2" pin

Flush Mount Hanger Bars

4-Position Holder Bar

• One piece design, easy to mount
• Holds four universal instruments
• Grey non-marring plastic

Post Mount Folding Arm / Hanger Assembly

• Includes 12" Folding Arm
• Post Mount Bracket with Swivel for 2" Post
• C-2000 Holder Bar, 3 Universal Cavities
• Accepts Additional Folding Arm Sections
• Holder Bar Rotates 360 Degrees

Post Mount Tele-Arm / Hanger Assembly

• Includes C-1906 Telescopic Arm
• Post Mount Clamp Provided
• CV Mounting Block C-1915S Included
• C-2000 Holder Bar, 3 Universal Cavities
• Holder Bar Rotates 360 Degrees

Reducing Bushing

• Use to mount 2" clamps onto smaller posts
• Convert 2" post mount options to fit smaller posts on demand

Telescoping Arm

• Breakaway, includes 2" post mount clamp
• Accepts hanger bars/trays with 1/2" dowel pin
• Compatible with wall and surface mounts
• Lightweight aluminum extrusion
• 24" - 40" Extension Arm
• 8" Rigid Arm
• Leveling adjustment
• Powder coated finish
• Use S-1414 to mount C.V. canister on end of arm

Folding Arm Sections

• Lightweight aluminum extrusion
• Sleek new profile, Tough Powder coated finish
• Adjustable bearing tension
• All pieces feature 1/2" mounting pin
• Use with choice of 1/2" pin mounting brackets, trays and hanger bars

Cabinet Mount Bracket for Post Mount Arm

• Beefy bracket secures sleeve mount unit arms to wall or cabinet
• Allows for 180° swivel
• Durable Powder coated to match arms
• Fits all 2" sleeve mount arms
• 6" x 6" plate, 5" x 5" mounting pattern

2" Post Mount Clamp Bracket

• Clamps to any 2" OD post
• Use to mount any of our 1/2" pin mounted arms
• Accepts hanger bars and trays
• Adjustable tension bearing

2-3/4" Post Mount Clamp Bracket

• Fits Belmont Excalibur OTP unit posts
• Powder coated aluminum
• Accepts 1/2" dowel pin mount trays

Folding/Tele Arm Mounting Plate

• This 4-x-4" mounting plate comes pre-drilled with mounting holes
• Accepts small controls or other equipment
• Slips into all arms that accept a 1/2" pin
• Perfect for use with folding or telescopic arms

Counter Top Bracket

• Accepts all arms with 1/2" mounting pin
• Perfect for folding or telescopic arms
• Mounts onto any horizontal surface

Swing Tray

• 12" x 12" Worksurface
• 13" Pivot arm with 1/2" pin

Wall Mount Bracket

• Accepts all arms with 1/2" mounting pin
• Perfect for folding or telescopic arms
• Mounts on wall or cabinet

Tub & Tray Holder

• Holder pivots on a 1/2" pin
• Slips into our folding or telescopic arms
• Holds up to a 9-1/2" x 12-1/2" tub or tray

Tray Holder with Hanger Bar

• 9-3/4" x 13-1/2" stainless steel holder pivots on a 1/2" pin
• Slips into our folding and telescopic arms
• Holds a stainless or plastic tray
• Includes a wrap around hanger bar

Tray Holder

• 9-3/4" x 13-1/2" stainless steel holder pivots on a 1/2" pin
• Slips into our folding and telescopic arms
• Holds a stainless or plastic tray

Belmont® Chair Adaptor

• Removable collar
• Laser-cut accuracy
• Fits: Belmont 023–028, Bel 7, 10, New Bel 20, Healthco Celebrity

Radius Chair Adaptor

• Fits Adec Performer
• Removable collar
• Surf Powder coated finish
• Laser-cut accuracy

48" Light Posts

• Durable Powder coated steel posts
• Includes crush bushing in base for chair adaptor
• Light bearing pre-installed

60" Light Posts

• Use for floor mounting installations
• Durable Powder coated steel posts
• Includes crush bushing in base
• Light bearing pre-installed

24" Unit Post

• 2" O.D. post is Powder coated
• Includes 1-1/2" I.D. arm bushing in top

Lightpost with Clamp

• 28" long with bearing pre-installed
• Clamps onto all 2" diameter posts
• Tough Powder coated finish

• Fits into 2" posts with a 1.8" ID

Lightpost Clamp

• Rigid alloy extrusion
• Easy to install
• Powder coated for lasting protection

Post Mount Tray Table

• Rugged molded plastic
• Swivels for optimum placement
• Post mount, adaptor selection included
• Approximate size 14" X 10 ‘ oblong
• Surf finish

Post Mount Utility Tray

• Clamps onto 2" diameter post
• 10" x 10" surface area
• Sturdy, heavy gauge aluminum
• Tough Powder coated finish

Stainless Steel Tray

• Domestic premium quality stainless steel
• Size 13F (9-3/4" x 13-1/2")

Plastic Tray Holder

• Easy to drill and mount to any bracket
• Holds instrument tray securely