• New manufactured circuit board by Chapman-Huffman
• Exact replacement for PELTON & CRANE CHAIRMAN
• PELTON & CRANE cross ref. # 017850

• New manufactured circuit board by Chapman-Huffman
• PELTON & CRANE COACHMAN II Programmable style circuit board
• PELTON & CRANE cross ref. # 019286
• NOTE! This circuit board will also work in the manual chair cross ref. # 018447 PCB assembly low voltage.

• New manufactured circuit board by Chapman-Huffman
• Exact replacement for DENTAL-EZ ELEGAN chair
• DENTAL-EZ cross ref. # 3517-017 or 3800-320

• New manufactured circuit board by Chapman-Huffman
• Exact replacement for DENTAL-EZ J-V SERIES chair
• DENTAL-EZ cross ref. # 3517-016 or 3800-104

• New manufactured circuit board by Chapman-Huffman
• Exact replacement for DENTAL-EZ E-2000 and ADVANT-AGE chairs
• DENTAL-EZ cross ref. # 3800-741

• Rebuilt Relay Cross ref. # 007612
• With exchange
• Relay and LED rebuilt circuit boards will interchange with each other

• Rebuilt LED Cross ref. # 017850
• With exchange
• Relay and LED rebuilt circuit boards will interchange with each other

• With exchange
• Cross ref. # 3800-320 or 3517-017

• With exchange
• Cross ref. # 3800-104 or 3517-016

• Exact replacement for PELTON & CRANE LFI and LFII light arm wire
• Color white
• Cross ref. # 007135

• Fits PELTON & CRANE CHAIRMAN patient chair
• PELTON & CRANE cross ref. # 007427

• Fits PELTON & CRANE CHAIRMAN patient chair
• PELTON & CRANE cross ref. # 007506

• Fits PELTON & CRANE CHAIRMAN patient chair
• PELTON & CRANE cross ref. # 007431

• Fits PELTON & CRANE CHAIRMAN patient chair
• PELTON & CRANE cross ref. # 007596

• Fits PELTON & CRANE foot control valve block assembly
• PELTON & CRANE cross ref. # 33 03 042
• O-Rings Pkg. of 5

• For O-Ring Kit 95-140-00
• ID 5/32
• OD 9/32
• WALL 1/16
• Pkg of 20
• PELTON & CRANE cross ref. # 33 03 034
• Use with 12-032-00
• Use only Parker O-Ring Lube CHAPMAN-HUFFMAN item 20-212-00

• Fits trolley to track power cord and wire harness connection
• Trolley fits PELTON & CRANE Lights LF Series, LF+ Series, LFT+, LFT II, and LFT II D (Except older models with contact strip)
• PELTON & CRANE cross ref. # 001030
• NOTE! If you are replacing the original Trolley Bracket Assembly with 016-50-00 you must also replace the Wire Harness 016-60-00. The connectors on the original assemblies are obsolete.

• Trolley fits PELTON & CRANE Track Lights LF Series, LF+ Series, LFT+, LFT II, and LFT II D (Except older models with contact strip)
• Plugs into trolley bracket assembly connector (Chapman-Huffman 016-50-00 pg. 48) and lays in track to supply light head power.
• PELTON & CRANE cross ref. # 013721
• NOTE! If you are replacing the original Wire Harness w/ 016-60-00 you must also replace the Trolley Bracket Assembly 016-50-00. The connectors on the original assemblies are obsolete.

• Fits PELTON & CRANE CHAIRMAN
• PELTON & CRANE cross ref. # 007903

• 3 pole terminal strip accepts 20-14 AWG wire with screw clamp connections
• Used for Chapman-Huffman handpiece Illumination System wire connections
• Includes mounting tape and mounting screw

• Fits 22-16 AWG
• Gray
• Pkg of 15

• Fits PELTON & CRANE LFI and LFI+ Light
• Cross ref. # 007028

• Fits PELTON & CRANE LFII Light
• PELTON & CRANE cross ref. # 33 36 992

Light Socket Assembly

• Fits ADEC PRE-CASCADE and CASCADE lights
• Includes installation hardware
• ADEC cross ref. # (Old #) 28.0633.00 (New #) 90.0463.01

• Hospital grade
• Fits cord diameter .300 - .655
• 15 amp
• 125 volt
• Black and White Nylon

• Hospital grade
• Fits cord diameter .300 - .655
• 15 amp
• 125 volt
• Transparent

• Hospital grade
• Fits cord diameter .300 - .655
• 15 amp
• 125 volt
• Black and White nylon

• Commonly used on DENTSPLY water injected vacuum pump
• This switch will break low voltage circuit of vacuum pump when water pressure drops below 10 PSI (Plus or minus 2 PSI)
• Brass constructed for water service
• 24 volt normally open switch
• 1/8 MPT in port
• DENTSPLY cross ref. # 1584603

• Fits MDT Rolux light and others
• 24 volt - low voltage rated
• 60 volt max
• MDT cross ref. # 312131210
• Also fits other low voltage applications
• Socket is designed to the ANSI codes and international standards
• Lamp holders are UL and CSA approved

• Fits Chapman-Huffman Light Source 60-575-00, 60-580-00,60-585-00 and 60-590-00
• Also fits MIDWEST Insight Light Source
• 120 volt - high voltage rated
• 300 volt max
• Also fits other high voltage applications
• Socket is designed to the ANSI codes and international standards
• Lamp holders are UL and CSA approved

• 120V, 5 amp switch
• Requires 10 PSI for activation
• 1/16" barb fitting
• 18 AWG wire, 6"
• Mounting hardware 15/32-32 thread with nut

• 120V, 5 amp switch
• Requires 10 PSI for activation
• 1/16" barb fitting
• 18 AWG wire, 6"
• Mounting hardware 15/32-32 thread with nut

• On/off control of 120V @ 7.5A, normally open, or 12V @ 15A
• 10 PSI operating actuation
• Barb fitting for 1/8 OD tubing
• 18 AWG wire, (6")
• Mounting hardware

• Replacement Switch Only for part 12-650-00

• Comfortable and compact handle design
• Attractive black finish to compliment room decor
• Compatible with most modern x-ray machines (with low voltage switching only)
• Modular construction designed for ease of installation
• Assembly includes: Push button exposure switch assembly with 25 ft. coil cord, Quick Disconnect Terminal Assembly, all necessary hardware and installation instructions

• Push button type
• Off-Mom. (on)
• Single pole, single throw
• Normally Open
• 3/4 amp, 125 volts AC/DC
• 1/4 amp, 250 volts AC/DC
• Screw terminals

• Ideal for mounting universal x-ray exposure switch 016-07-00
• Brushed stainless steel
• Fits single duplex box
• 1/2" diameter center hole
• Universal hole grommet with 3/8" ID
• X-Ray sticker
• Mounting hardware

Remote Exposure Switch

• For all GENDEX Intraoral X-Ray Systems
• GENDEX cross ref. #A8108AA

Push Button Switch

• Fits:
  • Gendex-770
  • Gendex-900 or GE-900
  • Gendex-1000 or GE-1000 Master Control
  • 765 DC and Expert DC
  • Gendex-Pan Small Control
  • Pan Elipse Master Control
  • Pan Elipse II Master Control
• GENDEX cross ref. # 46-197311P1

Main On/Off Power Switch

• FITS GENDEX 765DC X-Ray Control.
• ON/OFF ROCKER SWITCH WITH SOLDER PINS.
• GENDEX CROSS REF. # 632-0084P2

Power On/Off Switch

• FITS Control Panel ORTHORALIX 9000 Panoramic x-ray
• 15 A @ 125 VAC, DPST
• On/Off
• Panel mount, black body
• 1/4 quick disconnect tabs
• GENDEX cross ref. # 632-0044P1

• Fits GENDEX GX770
• Lighted on/off rocker switch
• Gendex cross ref. # 632-003IPI

• On-Off toggle
• 10 amp, 125 VAC; 8 amp, 125 VDC; 4 amp, 250 volts AC/DC
• 6" tinned wire leads
• 1/2" diameter mounting hole required
• Also fits older Castle Type 4 lights
• Mounting hardware

On-Off Light Switch

• Fits ADEC PRE-CASCADE, CASCADE and PERFORMER lights
• Includes toggle switch and (2) closed end splices
• NOTE: Rubber toggle extension is not included; re-use existing one from old switch
• ADEC cross ref. # 90.1039.00

• Fits PELTON & CRANE LFI and LFII lights
• Weld Fuse Bond Connecting is used to attach wire leads to switch terminals
• PELTON & CRANE cross ref. # 007096 / 33 21 853

• Fits Weber Ultron-90 X-Ray control
• Also fits RITTER G Coilcord Handle

• Fits PELTON & CRANE CHAIRMAN patient chair
• Red push button
• PELTON & CRANE cross ref. # 007898

• Fits PELTON & CRANE CHAIRMAN patient chair
• Black push button
• PELTON & CRANE cross ref. # 007899

• Momentary switch for individual operation of chair motors on DENTAL-EZ JS/VS series chairs
• Installation instructions and hardware included
• Cross ref. # 3800-100

• Automatic position switch for use in DENTAL-EZJSA / VSA chairs
• Smooth ASEPSIS type rocker
• Installation instructions and hardware included
• Cross ref. # 3800-101

• Used for operation of chair seat and back motors on DENTAL-EZ chairs
• Installation instructions and hardware included
• Cross ref. # 3800-148

• Momentary
• Fits ROYAL Dental Chair, for backrest up-down and base up-down functions
• (3) .250 wide terminals
• Black
• NOTE! ROYAL Dental cross ref. # 6445/black is sold in pkg of 2. Chapman-Huffman sells this switch one at a time.

• Fits ROYAL Dental Chair for chair auto-return function
• (6) .250 wide terminals
• ROYAL Dental cross ref. # 2801-2
• Black

Control Panel Vacuum Switch

• AIR TECHNIQUES.
• 24 Volt.
• White Rocker/Amber Light.
• AIR TECHNIQUES cross ref. # 53048

Peri-Pro Type Power Switch

• Fits Peri-Pro I.
• Amber Rocker
• Fits serial number 15000 and above.
• PERI-PRO cross ref. # 90262.

Peri-Pro Type Power Switch on Light

• Fits Peri-Pro I.
• Amber Rocker.
• AIR TECHNIQUES cross ref. # 94269

Peri-Pro II and III Type Ready Light Switch

• Fits Peri-Pro II and III.
• Green Rocker.
• AIR TECHNIQUES cross ref. new # 94977 / old # 94277

• Water solenoid
• 120 volt
• 2-way normally closed
• Brass body
• (2) 1/8 FPT ports
• 24" lead wires

• DENTSPLY type water solenoid assembly
• Fits CAVI-JET 30, CAVITRON 2002, BOBCAT, CAVITRON 3000, CAVI-ENDO, CAVI-MED
• 24 volt
• (2) 1/8 FPT Ports
• Cross ref. # 60470
• DENTSPLY cross ref. # 77792 is (1) 12-750-00 + (2) 14-205-00 90° Barbed Elbow

• DENTSPLY air type solenoid assembly which fits CAVI-JET, CAVI-JET 30 (main air solenoid), and PROPHY-JET C-300
• 24 volt
• (2) 1/8 FPT Ports
• Cross ref. # Old/60449 New/63771

• Fits AIR-TECHNIQUES DENTO-DRI # 3100R
• (2) 1/8" FPT ports
• 120 volt
• AIR-TECHNIQUES cross ref. # 3189

• Fits DENTSPLY MVS Vacuum Pump
• (2) 1/8" FPT ports @ 90°
• 115 volt
• Cross ref. # 1875901 Part # 6582201

• Fits DENTSPLY CAVI-JET 30, CAVI-ENDO 25 AND PROPHY JET30
• (2) 1/8" FPT body ports and (1) 10-32 female threaded top port
• 24 volt
• Cross ref. # 60500

• Fits DENTSPLY CAVITRON SPS ultrasonic scaler with SPS technology and CAVITRON JET with SPS technology
• SPS Style water solenoid
• 24 Volt DC
• (2) 1/8 FPT Ports
• Stainless Steel body
• DENTSPLY cross ref. # 571070003

• Commonly used on DENTSPLY CAVITRON solenoid valves
• 1/6 barb X 1/8 MPT
• Brass construction
• DENTSPLY cross ref. # 63827

• Main water solenoid for PHILIPS / DENT-X X-Ray film processor
• Exact replacement for DENT-X cross ref. # 869-010007 with three prong plug for adapting to older blue time temperature control box
• 1/4 FPT Ports

• Main water solenoid for DENT-X X-Ray film processor 810 Basic and 9000
• Exact replacement for DENT-X cross ref. # 869-012007 with MOLEX three pin connector
• 1/4 FPT Ports

• Fits BELMONT Power Wall Master Control
• (2) 1/8 FPT ports
• Top port, with unthreaded exhaust
• (2) 8-32 mounting holes
• 120 volt, NC, 3-way
• Cross ref. # PW78168

• Commonly used on water injected vacuum pumps
• 24 volt 60 Hz, 2 way NC
• (2) 1/8 FPT ports
• Stainless steel body
• DENTAL-EZ cross ref. # 64622083
• Also used for other water service applications

• Commonly used on water injected vacuum pumps
• 120 volt 60 Hz, 2 way NC
• (2) 1/8 FPT ports
• Stainless steel body
• DENTAL-EZ cross ref. # 64622084
• Also used for other water service applications

• Commonly used on water injected vacuum pumps
• 240 volt 60 Hz, 2 way NC
• (2) 1/8 FPT ports
• Stainless steel body
• DENTAL-EZ cross ref. # 64622085
• Also used for other water service applications

• ADEC Cross Ref.# 61.1335.00
• Fits ADEC CASCADE, DECADE and POSITIONER chairs
• O-Rings Pkg. of 5

• ADEC Cross Ref.# 61.1336.00
• Fits ADEC CASCADE, DECADE and POSITIONER chairs
• O-Rings Pkg. of 5

• ADEC Cross Ref.# 61.1337.00
• Fits ADEC CASCADE, DECADE and POSITIONER chairs
• O-Rings Pkg. of 5

• ID 5/8
• OD 3/4
• WALL 1/16
• Pkg. Qty 5

• Solenoid fits ADEC Priority chair
• Includes seal
• ADEC cross ref. # 60.0601.00

• ID 5/8
• OD 3/4
• WALL 1/16
• Pkg. Qty 5

5-Position Electrical Connector

• Fits KAVO KL700 ELECTROTORQUE PLUS Tubing

Ferrite Bead

• Suppression filter used to reduce electrical noise
• Used on KAVO KL700 ELECTROTORQUE PLUS

• Manufacturer Cross Ref #s For 115 Volt:
• AIR TECHNIQUES 41060
• APOLLO SEA95535
• DENTAL-EZ 5451400
• JUN AIR (Fan Only) JA5445100
• MDT KCKESSON 3-08-0578-10
• TECHWEST / TURBINE (Fan Only)CF-115
• Ball Bearing Construction
• Comes with mounting screws, not shown

• Manufacturer Cross Ref # For 230 Volt
• AIR TECHNIQUES 80516
• APOLLO SEA95540
• DENTAL-EZ 5451500
• JUN AIR (Fan Only) JA5445000
• MDT KCKESSON 3-08-0563-10
• TECHWEST / TURBINE (Fan Only) CF-230
• Ball Bearing Construction
• Comes with mounting screws, not shown

• Fits LORVIC/YOUNG type 8" table top impulse heat sealer
• Above impulse heat sealer is used for sealing nyclave tubing and plastic bags
• Also fits TEW 200 and other 8" Impulse heat sealers
• Kit includes Heating Element wire, 1/2" TEFLON Insulator tape with adhesive, and TEFLON element cover