Finally, a clever aspirator that communicates with the operator!

Turbo Smart reacts automatically to any functional problem or to any hazard to the machine's integrity. It performs like a small and large machine at the same time: small when it is used by one or two operators and large when it is upgraded to fit and even reduces its heat output when the demand for the suction is low.

In the event of a functional problem, the auto-protection feature electronically adjusts the unit's operation, resolving the problem without damaging the machine. The suction unit informs the operator of: current absorption, machine temperature, maintenance, vacuum head, condenser's capacity, room temperature, amalgam level, and running hours.

High Performance

Turbo Smart can be installed in parallel without peripheral units and without connectors.

It is possible to upgrade the Turbo Smart model A (2 surgeries) to model B (4 surgeries) by entering a password into the machine, either before or anytime after the installation of the unit. The operator can regulate the head value according to their variable needs.

Consequently, with Turbo Smart the dealer can count on one single aspirator adapting to all customers' requirements, while the dentist is sure to receive the aspirator which meets their needs.

Technical Specification

TURBO SMART VERSION A (2 SURGERIES)

• Maximum operating head for continuous service 2000mm H2O.
• Maximum flow 1400 l/min
• Suggested for 2 surgeries
• Sound pressure level with canalized air 68.2 dB (A)
• W=15 3/4" D=14" H=25 5/8"
• Net Weight = 80lbs Gross Weight = 100lbs

TURBO SMART VERSION B (3-4 SURGERIES)

• Output Power 1.5kW - 9 A
• Maximum operating head for continuous service 2000mm H2O.
• Maximum flow 1700 l/min
• Suggested for 3-4 surgeries
• Sound pressure level with canalized air 69.6 dB (A)
• W=15 3/4" D=14" H=25 5/8"
• Net Weight = 80lbs Gross Weight = 100lbs

Chicago X-Ray Systems, is proud to introduce into the dry vac market, the new Cattani MicroSmart!!!

MicroSmart's suction motor weighs only 16lbs, however, thanks to VSD Technology it outperforms suction motors of double its weight and dimensions.

The VSD facilitates optimal utilisation of the motor and reduces operating costs.

The energy saving is most evident when the suction is underutilised; when the demand on the suction decreases, the VSD reduces the power frequency to reduce speed. A reduction in motor speed results in a reduced energy absorption by the motor, providing a saving in electrical consumption.

MicroSmart is able to handle unexpected operational situations, without even stopping. Consistent suction is granted.

1. In difficult operational conditions, for example high temperatures, MicroSmart continues to operate without any damage to the unit. It does this through automatically decreasing the vacuum level until the temperature returns to normal.
2. In the case of excessive fluids from the surgeries entering the MicroSmart, an auto-protection system operates, momentarily opening a re-circulation valve, thus stopping the unit from being flooded. This also causes a momentary decrease in the speed of the suction motor, with the surgeries only noticing a minimal fluctuation if any at all, as the system goes back to its previous speed once the fluids are processes.
3. Thanks to the MicroSmart's computerized control, any sudden voltage fluctuations and/or current overload with the system's parameters, will not cause the unit to stop operating.