Bull Frog New Smart Compressors

BullFrog Smart Air

BullFrog Motor Repair (a division of Hager Worldwide, Inc.) created a leadership position through the experience and unparalleled support of their dedicated service team, with 40 years of combined experience.

For over 20 years, BullFrog has been relied upon to repair, rebuild, and provide technical support for air compressor units and vacuum pumps of all makes and models. Today, as part of Hager Worldwide, they are depended upon to ensure optimal performance of air compressors and vacuum pumps throughout the USA.

After years of research and development, BullFrog proudly introduces its own Smart+Air series of air compressors. The Smart+Air series is held to the highest standard of performance just as the service team has always held themselves to the highest standards.

Since their beginning, BullFrog has been looked to as a highly valued resource for service and technical support. Now they want to give you piece of mind by putting all their know-how and experience behind the Smart+Air series of air compressors.

Clean, Quiet, Dry Air

BullFrog compressors, created from the experience of more than half a century of R&D. Designed to deliver clean, dry air to operate dental handpieces.

Compressed air output by a BullFrog compressor is:

• Free of oil residues, thanks to dry compression
• Free of condensation, thanks to the single-tower absorption dryer with high drying power
• Free of any smell, thanks to tank inner coating with anti-oxidant epoxy paint
• Condensation drain installed between aftercooler and desiccant dryer

Smart+Air line is available in three different sizes to meet the needs of any dental office.

• Smart+Air: super-silenced complete with all accessories (cabin-in soundproofing material with internal cooling system and dryer).

The “Secure Starting” system is standard and allows the compressor to restart with no problems, even in the case of a power failure or emergencies (always starts with vented head).

• BullFrog “Hero+Air” series: portable, super-noiseless solution. The 1.5 HP compressor is easy to use and transports with a fully equipped control panel for emergency use.

In addition to the standard models, it is possible to configure the compressor to meet your needs. Bare compressors, spare pumps and dryers are available separately for modular installations. Please refer to the following table to find the best STANDARD configuration.

Smart+Air 160

IDEAL TO DELIVER COMPRESSED AIR TO 1-2 OPERATORS.

• 24-lt tank, with inner anti-oxidant coating on the Smart+Air 160
• High-capacity fan and forced air system for improved cooling
• Cable with Plug-and-Play socket
• “Secure Starting” solenoid valve
• Air outlet filter
• Tank vibration pads, with suction cups for a safer installation
• Motor thermal cut-out
• Smart+Air silenced version with soundproofing casing and drier (optional)
• H2O filter between cooler and dryer (only installed in units with dryer)
• Minimum footprint thanks to a super-compact design
• Triple anti-vibration system (under motor, under tank, under baseplate)

Smart+Air 320

IDEAL TO DELIVER COMPRESSED AIR TO 3-4 OPERATORS.

• 50-lt tank, with inner anti-oxidant coating on the Smart+Air 320
• High-capacity fan and forced air system for improved cooling
• Cable with Plug-and-Play socket
• “Secure Starting” solenoid valve
• Air outlet filter
• Tank vibration pads, with suction cups for a safer installation
• Motor thermal cut-out
• Smart+Air silenced version with soundproofing casing and drier (optional)
• H2O filter between cooler and dryer (only installed in units with dryer)
• Minimum footprint thanks to a super-compact design
• Triple anti-vibration system (under motor, under tank, under baseplate)

Smart+Air 640

IDEAL TO DELIVER COMPRESSED AIR FROM 6-8 OPERATORS.

• Available in Smart+Air silenced version, with soundproofing casing and drier
• 90-lt tank, with inner anti-oxidant coating
• High-capacity fan and forced air system for improved cooling
• “Secure Starting” solenoid valve
• Air outlet filter
• Double anti-vibration system, with pads under motor and suction cups under tank, for a safe and stable operation
• Motor thermal cut-out
• Sequencing controller for single or dual operation with delayed start-up and compressor switching
• Compressor heads may be run independently
• H2O filter between cooler and dryer (only installed in units with dryer)

BullFrog “Hero+Air”

When your compressor is down, call on a “hero” LOW NOISE PORTABLE COAXIAL COMPRESSOR 1.1 kW

• New oil-less compressor pump
• Reduced noise environment
• Fully faired body, practical “suitcase” construction
• Fully equipped control panel
• Wheels for easy moving
• Power 1.5 HP
• Oil-less
• 6 lt tank
• It can be used horizontally or vertically
• Accessories compartment
• Spiral hose and blow gun included
• Covered by a standard 1 year warranty

Smart + Air Dental Compressor

Smart + Air 160 (1-2 Operatories) - 1.5 HP (24 liter tank)

Smart + Air 320 (3-4 Operatories) - 3.0 HP (50 liter tank)

Smart + Air 640 (6-8 Operatories) 3.0 + 3.0 HP (90 liter tank)

Smart + Air - Spare Parts